Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.
  • Upcoming Events

    • 11 May 2024 02:00 PM Until 03:00 PM
      1  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      This workshop is also a great time for any students at Master Samurai Tech to bring any and all questions about the coursework. We're happy to walk through any concepts you're having trouble with. Think of it like office hours with your teachers.
      As part of this workshop, we'll talk through a couple of case studies troubleshooting computer-controlled appliances. 
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, May 11 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

noisey compressor


navtek2

Recommended Posts

trane condensor unit makes rattle and clatter noise when shuts off. didnt use to make this noise . is it about ready to fail .replaced condensor fan last year. unit is 19yrs old. any ideas?

Link to comment
Share on other sites

  • Replies 4
  • Created
  • Last Reply

It could be yer compressor rubber mounts are making that noise

Link to comment
Share on other sites

they appear to be ok ,no cracking, sounds internal. a buddy says it might be internal springs that suspend assy inside the can. dont know for sure.

Link to comment
Share on other sites

  • 3 weeks later...

Some of the old type units utilized a check valve in the high side line that would be the part I would suspect first. The old reciprocating compressors did not back seal well and if the valve where not installed or failed the gas pressure would actually chug the compressor in reverse when it shut down. Shortened the life of many a compressor.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.


×
×
  • Create New...