Miele G6987 Dishwasher Service Mode and Schematic 1.0.0

Miele G6987 Dishwasher Service Mode and Schematic

Error codes: 
F1- Water/heating NTC short-circuited
F11- Water-drainage fault
F12- Water-intake fault at start of step
F13- Water intake fault at end of step
F14- Water-intake fault – heater pressure switch (B1-13)
F15- Hot-water intake fault
F179- EFU/MPPW supply voltage
F18- Flow meter (B3-4) stationary state monitor
F19- Flow meter (B3-4) function stiff
F2- Water/heating NTC open-circuited
F24- Heater-relay (K1-1) contact
F25- Target-temperature fault
F26- Boiling protection
F32- Door lock does not close
F33- Door lock does not open
F36- Door lock switch defective
F40- Electronic fault
F42- Line (mains) frequency registration fault
F47- Selection-display electronic (BAE)/Control-power electronic (SLT) interface fault
F51- Heater pressure switch (B1-13)
F51- Heater pressure switch (B1-13) (after replacing the connection box)
F52- Heater pressure switch (B1-13) has reset during heating
F63- Slide shutter fault
F70- Toekick float switch
F78- Circulation-pump fault
F79- Circulation pump communication fault
F84- Slide shutter positioning fault during water intake
F85- Slide shutter signal change fault
F88- Turbidity sensor (B3-10) fault