Search the Community

Hi yes I posted on this forum before recently but I still need help please I have a Frigidaire affinity model aeq8000fso it stopped heating while drying when doing the diagnostics I got the code E5b or E56. So I replaced the thermistor then it worked for a little bit but would stop after a few minutes hearing that is so then I replaced the heating element with the fuse that is on the panel it work d great for about 2-3 weeks then it will start tun king and will heat up sometimes other times no but it will shut off after approximately 10 minutes of running the three lights above the start button then start to blink please help me as I have already put 200 into the dryer with replacement parts thermostat and heating element and silver panel with fuse attached and I am temporarily out of funds trying to catch up on mortgage after being laid off so any help or troubleshooting would be of great assistance

I have a dryer that is running but not producing heat. When I run the diagnostics the code that appears is E5b or E56. I have replaced the thermistor by the blower housing. I also have taken out the thermal fuse, the heating coil, and the high limit fuse and brought them to a local appliance parts warehouse who put them on a multimeter and said they were all set. So the only thing I replaced was the thermistor it ran great for A few loads over the next few days like a new dryer. Then all of a sudden it stopped drying and now it starts a cycle normally taking and will start withled timer then after a while the LEDs start chasing each other then the dryer stops and the 3 lights are blinking next to the start button and I have no heat again. So please help me out. I did purchase the heating coils but haven't installed them applywt cause when I originally went to appliance place they said they were old but fine when put multimeter on it. Please any assistance is awesome. The code again is E5b or E56 It is is a frigidaire affinity model number aeq8000fso Thanks k you John