Hi guys,
After 2 years and 1 month, my Maytag dishwasher just died (by the way, is Maytag a good and reliable brand anyway?).
Here is the story:
1) After starting the dishwasher, the water comes in. But after that, nothing will happen. No sound, nothing.
2) If I open the door, then close it, and press resume. I can hear a few "click" sounds, each separated by a second or two. But still nothing happens after that.
3) If I press the cancel button, water drains out correctly.
4) If I run the self diagnosis, it shows code such as (in this order): F6, E4, F-, E-
5) Via some google, some people says the code may indicate water intake issue - but it does get water in when I start the machine, so I am not sure if that is the true issue.
PS, not always, but a few times, I think I smell a light rubber burn smell. But not always and the smell is light.
Most of my DIY friends say maybe the motor is dead (the "click" sounds means it can't start the motor). But before I jump on that, just want to see if there is any other possibility.
Thanks!