Search the Community

Hi, I have a Frigidaire (Electrolux) wall mounted oven that stopped baking recently. I suspected the temperature sensor and replaced that with a new part. The broil/grills works properly, when set to broil, the broil element inside the oven heats up quickly, turn orange and works fine. The newly replaced temperature switch comfirms this, as temperature changes show on the oven display. The lower -- bake element doesn't seem to do anything. I have accessed the bake element ends from the back of the oven. After disconnecting them from their wiring, I did a continuity test and the element measured 26 ohms. I understand that this means there is no damage or integrity problems with the element itself. Not sure how to diagnose the problem after this. I was also looking for a overheating sensor switch to reset that. I understand that this sometimes gets tripped up after selfcleaning. I have not done any selfcleaning but thought a reset wouldn't do any harm. However, it seems this switch is not located on the back of the oven for my model? Finally, my model # is CGEB27S7CB1. I appreciate any help with this. John.