FAQs | Repair Videos | Academy | Newsletter | Contact

DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.

Upcoming Events
- Jan 04
  
  Appliantology Live Dojo, Saturday, 1/4/2025 @10 AM ET
  04 January 2025 03:00 PM Until 04:00 PM
  0
  All Appliantology tech members are invited to join in the conversation for all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
  This event is also a great time for any students at Master Samurai Tech to bring any and all questions about the coursework. We're happy to walk through any concepts you're having trouble with. Think of it like office hours with your teachers.
  Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
  Who: This workshop is only available to tech members at Appliantology.
  When: Saturday, January 4 @10:00 AM Eastern Time.
  Where: Online via Zoom
  How:
  Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it. And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Kitchenaid Kdrp487mss03 getting extremely hot, locking the door and broiler turning on.

By Niko76
September 3, 2023 in DIY Appliance Repair Help

https://appliantology.org/topic/101053-kitchenaid-kdrp487mss03-getting-extremely-hot-locking-the-door-and-broiler-turning-on/

Followers 0

Recommended Posts

Niko76

Posted September 3, 2023

Kdrp487mss03 locking and going into clean mode on its own. When turned on it will turn on broiler and lock the door and way over heat. I had posted on an another appliance forum awhile ago and a gentleman helped me out, but that site is no longer working and like an idiot I didn’t write down the parts. I believe he had said it was a board that was bad and needs rebuilt. I have the schematic I will try to attach.