GU2300XTVS0: Random pattern on lights & keypad sometimes no responsive [Quiet Partner III]

[ocallau]

Brand/Model: Whirlpool, Quiet Partner III, GU2300XTVS0

Dishwasher started to have some issues a few months back when we were not able to change cycle settings. This was not an issue since we always run on 'Normal' and 'Heated Dry'. However, a couple of days ago I noticed lights on right side of the panel were randomly flashing for a quick second. I just ignore it because cycle was running normal.

Now dishwasher wont start unless I do these exact steps:

1. Reset it by turning power off and back on (from electric board switch) when door is open
2. Closing door (a noise similar to draining will start)
3. Pushing cancel button (noise will stop)
4. Pushing start button (and a cycle start)

Cycle will clean dishes as normal with heated dry, like there were no issue. However if I want to start another cycle, I'll need to do above steps again.

Also lights will show very random patterns during the whole cycle as shared in the images.

What should I do?

20240303_075457984_iOS.heic 20240303_075459584_iOS.heic

[ocallau]

Adding more photos

20240303_075500558_iOS.heic 20240303_080646627_iOS.heic