Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • 09 November 2024 03:00 PM Until 04:00 PM
      3  
      All Appliantology tech members are invited to join in the conversation for all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      This event is also a great time for any students at Master Samurai Tech to bring any and all questions about the coursework. We're happy to walk through any concepts you're having trouble with. Think of it like office hours with your teachers. 
      Also, follow the Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, November 9 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Full service manual needed GE profile


Recommended Posts

Manufacturer: GE
Type of Appliance: Gas range
Model Number: ZGP366NR5SS
Have you validated the model number at an online parts site like Repair Clinic? (yes or no): Yes
Have you watched the video on how to search for manuals and have you searched the Downloads section prior to posting this request? (yes or no): Yes

I found the mini manual and a few bulletins that don't relate to this problem. Bake will not turn on. Door switch works fine. Good igniter. Broil works. I need the full size service manual for this model series. The mini manual doesn't tell you how to troubleshoot this problem and doesn't go into details on what power is going from the encoder to the relay board and what is the ignition sequence for igniting the gas.

20240917_103852.jpg

Link to comment
Share on other sites

  • Replies 3
  • Created
  • Last Reply

Top Posters In This Topic

  • Captain Dunsel

    2

  • Ananda

    2

Take a look at these:

Also this training manual:

 

  • Like 1
  • Thanks 1
Link to comment
Share on other sites

Thank you! It turns out this model turns on the power to the igniter and instantly turns it off if it's an open circuit. That's what was confusing about this model and troubleshooting it.

Link to comment
Share on other sites

×
×
  • Create New...