Jump to content
Click here to check out our structured, online appliance repair training courses for rookies and experienced techs.

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • 21 December 2024 03:00 PM Until 04:00 PM
      2  
      All Appliantology tech members are invited to join in the conversation for all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      This event is also a great time for any students at Master Samurai Tech to bring any and all questions about the coursework. We're happy to walk through any concepts you're having trouble with. Think of it like office hours with your teachers. 
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, December 21 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Recommended Posts

Posted (edited)
Manufacturer: Samsung
Type of Appliance: Washer
Model Number: Wa50r5200aw/us
Have you validated the model number at an online parts site like Repair Clinic? (yes or no): Yes
Have you watched the video on how to search for manuals and have you searched the Downloads section prior to posting this request? (yes or no): Yes

I got this tech doc. From here. And ive bought 2 motors. The old one and the new ones,  they all read 9.3- 9.8 kohms. Im sorry if this is not the right place for this post. But im sure other techs would like to chime in. I kight be doing something wrong. But here on the tech sheet is says resistance should be around 19.3 kohms witch i think is def a typo. 

Screenshot_20241023_125249_OneDrive.jpg

Edited by Jonesco99
  • Replies 2
  • Created
  • Last Reply

Top Posters In This Topic

  • Jonesco99

    2

  • Vance R

    1

Posted

Probably a typo, BTW it shows 19.3 ohms not 19.3 k ohms. If it is multi winding motor they should be all equal. 

  • Like 2
Posted

Ok yes all 3 winding were reading the same. And thanks for the correction. 

×
×
  • Create New...