Jump to content
Click here to check out our structured, online appliance repair training courses for rookies and experienced techs.

FAQs | Repair Videos | Academy | Newsletter | Contact


DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.

  • Upcoming Events

    • Appliantology Live Dojo, Saturday, 10/26/2024 @10 AM ET
      26 October 2024 02:00 PM Until 03:00 PM
      0  
      All Appliantology tech members are invited to join in the conversation for all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      This event is also a great time for any students at Master Samurai Tech to bring any and all questions about the coursework. We're happy to walk through any concepts you're having trouble with. Think of it like office hours with your teachers. 
      Also, follow the Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, October 26 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Maytag Adaptive Defrost Control Board

John E. Hoagland

By John E. Hoagland
in DIY Appliance Repair Help

Recommended Posts

John E. Hoagland Sōhei

John E. Hoagland

Posted
Posted

I recently received a new ADC board and it is different from the original.  In addition to being physically smaller, the connector is labeled, from left to right,  L1, DOOR, STAT, L2, COMP AND HTR.  Whereas the connector on the original board is labeled L1, TEST all other pins ore the same.  My question is do you short L1 and DOOR to enter defrost?  I tried that but the relay did not click.  I took a chance and installed the board anyway. So far the refrigerator is working as it should. Any information anyone can provide will be appreciated.  Thank you. 

Link to comment
Share on other sites
  • Replies 2
  • Created
  • Last Reply

Archived

This topic is now archived and is closed to further replies.

Go to topic listing
×
×
  • Create New...