Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.
  • Upcoming Events

    • 26 April 2025 02:00 PM Until 03:00 PM
      0  
      All are invited to join in the conversation for all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is available to everybody, including you! You don't have to be a member of Appliantology to join the fun.
      When: Saturday, April 26 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to register. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it. 

Working with Electronic Circuit Boards in Appliance Repair


Samurai Appliance Repair Man

Recommended Posts

  • 11 months later...
  • Replies 1
  • Created
  • Last Reply
Posted

This page had a reference for a Bosch dishwasher circuit board. I had mine open to look at buttons and saw the other contact for the relay gone bad.  It is at the bottom solder joint of the long run to the right of the picture.  Your picture and the other ones on the web all point to the same place but mine was different.

Here is the page

http://fixitnow.com/wp/2006/06/09/bosch-dishwasher-takes-forever-to-complete-a-cycle/

I need a Bosch control panel white case because all 8 button tabs were broken off. Anybody got a burnt control panel?

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...