Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.
  • Upcoming Events

    No upcoming events found

Dishwasher leaking at beginning of cleaning cycle


appliance_grasshopper

Recommended Posts

Posted

Dear Enlightened ones,

When I turn the dial to start wash and the water starts to fill, water leaks onto floor.

Roper RUD 3000DQ2

Any ideas, diagnostic techniques or sage wisdom would be appreciated.

Konichiwa,

Tim

  • Replies 2
  • Created
  • Last Reply
  • Team Samurai
Posted

Have a look at the fill hose port-- item 37 below-- while it's filling. You can use a mirror and flashlight looking underneath along that side or pull the dishwasher out a few inches.

O2027813-00003.png

  • 2 months later...
Posted

a Very Belated and Humble Arigoto,

The water hose to the fill valve was bent and the clamp that held the water to the valve couldn't handle the extra pressure. Straightening out the hose made all the difference in the world.

I will go back to deep meditation now.

Tim

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...