Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.
  • Upcoming Events

    • 10 May 2025 02:00 PM Until 03:00 PM
      1  
      All are invited to join in the conversation for all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is available to everybody, including you! You don't have to be a member of Appliantology to join the fun.
      When: Saturday, May10 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to register. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it. 

GE Bottom Mount PDS20MFS


jambatt

Recommended Posts

Posted

FF at 40 but FR at 24. Condensor fan not working. 11v DC at J2 pins 5&8. Suspect fan took out board or vice versa. Seeking some confirmation before ordering board along with fan motor. OBTW, anyone got any suggestions on how to remove the old fan motor. This POS looks like it wasn't designed for replacement.

  • Replies 2
  • Created
  • Last Reply
Posted

GE_Refrig_Board.pdf

I have a Service Manual for the PDS20 (if you need it),

but doesn't mention how to remove the Fan, but shows the Wiring Diagram and the Fan connections

J2- 2

J2-3

J2-5

 doesn't show J2-8

 

Posted

Thanks for the reply Reg. Was using cheat sheet that is on the forum.

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...