Jump to content
LIMITED TIME OFFER: Get up to $100 off tuition for Master Samurai Tech courses through November 30th ×
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.

  • Upcoming Events

    • Appliantology Live Dojo, Saturday, 12/7/2024 @10 AM ET
      07 December 2024 03:00 PM Until 04:00 PM
      1  
      All Appliantology tech members are invited to join in the conversation for all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      This event is also a great time for any students at Master Samurai Tech to bring any and all questions about the coursework. We're happy to walk through any concepts you're having trouble with. Think of it like office hours with your teachers. 
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, December 7 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

"F-7" + beeping on Jenn-Air FCG20510

slantsixdan

By slantsixdan
in DIY Appliance Repair Help

Recommended Posts

slantsixdan Sōhei

slantsixdan

Posted
Posted

Subject and description pretty much say it all. Out of the blue this evening, my Jenn-Air FCG20510 gas freestanding range began beeping and displaying "F-7" on the clock display. The oven was not in use at the time, nor had it been recently used. Pressing the "Off" pad cleared it. Random error...? Omen of doom...?

  • Replies 2
  • Created
  • Last Reply
Pegi

Pegi

Posted
Posted

[align=left]F7 [/align]

[align=left]Function key shorted or stuck button[/align]

[align=left]Replace touch pad or clock assembly (also called the ERC) or attempt to un-stick button[/align]

 

[align=left]F7[/align]

[align=left]Shorted key sensed for 32 seconds[/align]

[align=left]1. Membrane shorted, or,

2. Display board defective[/align]

slantsixdan Sōhei

slantsixdan

Posted
  • Author
Posted

Thanks. If it happened once, it seems likely to happen again. I'll look into a replacement ERC.

Archived

This topic is now archived and is closed to further replies.

Go to topic listing
×
×
  • Create New...