Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • 15 March 2025 02:00 PM Until 03:00 PM
      5  
      All are invited to join in the conversation for all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is available to everybody, including you! You don't have to be a member of Appliantology to join the fun.
      When: Saturday, March 15 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to register. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it. 

Recommended Posts

Posted

If anyone has a copy of the above mentioned service manual, it would be much appreciated. Thanks in advance! --EseGuey

  • Replies 2
  • Created
  • Last Reply

Top Posters In This Topic

  • EseGuey

    2

  • RegUS_PatOff

    1

Popular Days

Top Posters In This Topic

Posted

Thank you sooooooooo much, I'm going to tear into it now. My problem is that out of the blue it started making some strange noises. So the misses shut it off. She tried restarting it and the cycle appeared to restart, but never stopped. It went on for hours before she intervened and manually shut it off. She opened the door and the water left in the washer would not drain out. When I got home I tried to start it and it sounded just like an electric motor that had mechanically seized up. The lights went dim in the kitchen as the motor buzzed for a few seconds before it quit on its own. The misses also pointed out that there are a few silicone o-ring type seals that were previously part of some tupper ware lids, missing from them. I'm wondering if they didn't get sucked into the motor somehow. Any ideas? Thanks in advance!!--EseGuey


×
×
  • Create New...