Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • 21 December 2024 03:00 PM Until 04:00 PM
      2  
      All Appliantology tech members are invited to join in the conversation for all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      This event is also a great time for any students at Master Samurai Tech to bring any and all questions about the coursework. We're happy to walk through any concepts you're having trouble with. Think of it like office hours with your teachers. 
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, December 21 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Recommended Posts

Posted

trying to adjust temp in oven

  • Replies 6
  • Created
  • Last Reply

Top Posters In This Topic

  • court

    4

  • RegUS_PatOff

    3

Top Posters In This Topic

Posted

[align=left]"The bake temperature calibration can be increased or decreased in three 7 F steps for a maximum offset of 21 F"[/align]

[align=left]Tech Sheet - 313426 (aligned and OCR'd)[/align]

Posted

thanks for quick responance. but that isnt my key pad. took back off my board competty differant. rechecked mo#rf395pxvon

Posted
  • 2 weeks later...
Posted

s0rry it took so long to get back .i tried to open this one but said it could not be found

Posted

[user=7066]court[/user] wrote:

s0rry it took so long to get back .i tried to open this one but said it could not be found

why is it that the links I post that don't work, are the ones I forget to test ?  :headscratch:

trying again ...

Posted

thanks much thats the one


×
×
  • Create New...