Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.

  • Upcoming Events

    • Appliantology Live Dojo, Saturday, 5/24/2025 @10 AM ET
      24 May 2025 02:00 PM Until 03:00 PM
      0  
      All are invited to join in the conversation for all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is available to everybody, including you! You don't have to be a member of Appliantology to join the fun.
      When: Saturday, May 24 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to register. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it. 

Speed Queen Model # AWM593L2 Ser.# 9502065682

Waneewek

By Waneewek
in DIY Appliance Repair Help

Recommended Posts

Waneewek Kohai

Waneewek

Posted
Posted

I have a Speed Queen Washer Model # AWM593L2 that is leaking water from around the bottom of the wash tub.  There is a seal located under the drive bell.  I had to use a puller to get it off.  Now, when I install the new one, do I have to press the new seal into place and how far?  I put the new seal on and used the drive bell to screw it down into place, but it still leaks. 

Do you have any service manuals or guides on how to replace this seal.

Thanks,

Wan 

  • Replies 1
  • Created
  • Last Reply
RegUS_PatOff Sensei

RegUS_PatOff

Posted
Posted

AWM593L2 Parts Manual

link PM'd

Archived

This topic is now archived and is closed to further replies.

Go to topic listing
×
×
  • Create New...