Jump to content
Click here to check out our on-demand appliance repair training webinars.

FAQs | Repair Videos | Academy | Newsletter | Contact


DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.

  • Upcoming Events

    • Appliantology Live Dojo, Saturday, 4/12/2025 @10 AM ET
      12 April 2025 02:00 PM Until 03:00 PM
      0  
      All are invited to join in the conversation for all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is available to everybody, including you! You don't have to be a member of Appliantology to join the fun.
      When: Saturday, April 12 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to register. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it. 

Kenmore (Whirlpool) Oasis HE washer 110.27062601 tech sheet

Waneewek

By Waneewek
in DIY Appliance Repair Help

Recommended Posts

Waneewek Kohai

Waneewek

Posted
Posted

I have a Kenmore Oasis washer Model # 110.27062601 that starts to work but stops after about 2 minutes of operation. The fill valve opens and water is entering the washer, but after 2 minutes it stops filling and just sits there. If I push the stop button once, the door should unlock so I could add more clothes, but it doesn't unlock. I push the stop button a second time and all of the lights go out, water doesn't drain and door doesn't unlock. After a couple of minutes go by the door eventually unlocks, but water still sits in the tub.

Can I get the the tech sheets for this model? And, if you have any thoughts on this problem they sure would be appreciated!

Thanks,

Wan

  • Replies 2
  • Created
  • Last Reply
  • 3 weeks later...
Waneewek Kohai

Waneewek

Posted
  • Author
Posted

It must have been a loose connection in the control panel. I checked all of the connections (which seemed good) and put the washer back together and it has been working good since. :thanks:

Thanks for your help,

Wan

Archived

This topic is now archived and is closed to further replies.

Go to topic listing
×
×
  • Create New...