Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.

  • Upcoming Events

    • Appliantology Live Dojo, Saturday, 6/28/2025 @10 AM ET
      28 June 2025 02:00 PM Until 03:00 PM
      0  
      All are invited to join in the conversation for all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is available to everybody, including you! You don't have to be a member of Appliantology to join the fun.
      When: Saturday, June 28 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to register. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it. 

Goodman gas furnace modl#Gas80904BXbb Serial# 0701105994

mrmagoo

By mrmagoo
in DIY Appliance Repair Help

Recommended Posts

mrmagoo

mrmagoo

Posted
Posted

When i turn up the thermostat, the igniter will light but the burner wont, any sugesstions

  • Replies 2
  • Created
  • Last Reply
applianceman18007260692 Sensei

applianceman18007260692

Posted
Posted

Take some pictures and post them so we can see what you have. I would say off hand to check the solenoid on the gas valve for continuity. I bet the gas valve solenoid is gone. The voltage is there because the ignitor is lighting the pilot. So none of the limits have tripped. Post some photos. Looking up furnaces on line to see what you have is impossible.

applianceman18007260692 Sensei

applianceman18007260692

Posted
Posted

Archived

This topic is now archived and is closed to further replies.

Go to topic listing
×
×
  • Create New...