Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.

  • Upcoming Events

    • Appliantology Live Dojo, Saturday, 6/28/2025 @10 AM ET
      28 June 2025 02:00 PM Until 03:00 PM
      0  
      All are invited to join in the conversation for all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is available to everybody, including you! You don't have to be a member of Appliantology to join the fun.
      When: Saturday, June 28 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to register. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it. 

ruud rooftop package

skjch

By skjch
in DIY Appliance Repair Help

Recommended Posts

skjch

skjch

Posted
Posted

I have a ruud rooftop package. The main burners do not light. Pilot and spark comes on, then off, then repeats, but no burners. Blower does come on as well. the unit is 25 years old, but label is long gone. where else can I get model #. Thanks

  • Replies 2
  • Created
  • Last Reply
RegUS_PatOff Sensei

RegUS_PatOff

Posted
Posted

. . . label is long gone. where else can I get model #. Thanks

I'm not a HVAC master, but a few picture (links) of the Controls, etc, may help the Masters
applianceman18007260692 Sensei

applianceman18007260692

Posted
Posted

Make sure you have a good ground from pilot to control. Use some sand cloth to clean the Kanthal spark ignitor. It does 2 things. It lights the pilot AND verify's to the control the flame is lit.

Archived

This topic is now archived and is closed to further replies.

Go to topic listing
×
×
  • Create New...