Jump to content
Click here to check out our structured, online appliance repair training courses for rookies and experienced techs.

FAQs | Repair Videos | Academy | Newsletter | Contact


DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.

  • Upcoming Events

    • Appliantology Live Dojo, Saturday, 5/10/2025 @10 AM ET
      10 May 2025 02:00 PM Until 03:00 PM
      0  
      All are invited to join in the conversation for all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is available to everybody, including you! You don't have to be a member of Appliantology to join the fun.
      When: Saturday, May10 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to register. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it. 

Maytag DW won't complete a cycle

Toranaga

By Toranaga
in DIY Appliance Repair Help

Recommended Posts

Toranaga Sōhei

Toranaga

Posted
Posted

Customer says sometimes it won't complete a cycle. He also says he can somtetimes coax it to complete by opening and closing the detergent door a few times. Sounds weird to me. I am thinking its the door switch? Any ideas?

Thanks

T

  • Replies 5
  • Created
  • Last Reply
kdog Sensei

kdog

Posted
Posted

he can somtetimes coax it to complete by opening and closing the detergent door a few times. I am thinking its the door switch?

Doubtful that moving the dispenser door effects it, however you cannot access the dipenser without first opening the door switch ......

Toranaga Sōhei

Toranaga

Posted
  • Author
Posted

Right, Its starts up and runs for a sec, then shuts off

Toranaga Sōhei

Toranaga

Posted
  • Author
Posted

I ran it through the field service test and it showed no malfunction

What gives?

any ideas?

kdog Sensei

kdog

Posted
Posted

I am thinking its the door switch?

Sounds logical

Toranaga Sōhei

Toranaga

Posted
  • Author
Posted

The handle was broken inside the door. If it wiggled just right the thing would run fine. But let it get shaken just a hair and.....

Archived

This topic is now archived and is closed to further replies.

Go to topic listing
×
×
  • Create New...