Jump to content
Click here to check out this guide.

FAQs | Repair Videos | Academy | Newsletter | Contact


DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.

  • Upcoming Events

    • Appliantology Live Dojo, Saturday, 6/7/2025 @10 AM ET
      07 June 2025 02:00 PM Until 03:00 PM
      0  
      All are invited to join in the conversation for all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is available to everybody, including you! You don't have to be a member of Appliantology to join the fun.
      When: Saturday, June 7 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to register. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it. 

Kenmore 153.331544 issue

gtheilerjr

By gtheilerjr
in DIY Appliance Repair Help

Recommended Posts

gtheilerjr

gtheilerjr

Posted
Posted

My Kenmore gas water heater will stay working for a few weeks or for a couple days ! Is this a thermostat issue ? All other parts are clean and it re-lites with no problem ! Is the thermostat located in the control panel ? Any suggestions on where to start ? Here is the diagram http://www.searspartsdirect.com/partsdirect/part-model/Kenmore-Parts/Water-heater-Parts/Model-153331544/0582/1082000/P0507089/00001?blt=06&prst=0&shdMod=153331544

Thanks

  • Replies 1
  • Created
  • Last Reply
gtheilerjr

gtheilerjr

Posted
  • Author
Posted

Also, with our temperatures going on 22 days of 100 - 105 , I wonder if the High Temp shutdown was activated ! Do you know at what temp this is activated or should it matter ? I am sure the attic has been really hot and we set the temp right before the A setting !

Archived

This topic is now archived and is closed to further replies.

Go to topic listing
×
×
  • Create New...