Amana guia090a30 continuos flash code

[wernerhouse]

Getting this error

flame senced >5 sec without gas valve.

igniter lights up, flame turns on for about 2 sec. then it restarts about 3 time, then blower runs with out flame.

Need your help

Dan

[RegUS_PatOff]

Flame Sensed with No Call for Heat.

If the control senses a flame when the gas valve is de-energized,

it will run the air circulator blower and the induced draft blower continuously.

The probable causes are either a short to ground in flame sense circuit,

miswiring, lingering burner flame or a slow closing gas valve.

[wernerhouse]

Could the flame sensor be bad?

[RegUS_PatOff]

could be shorted (always "ON")

[wernerhouse]

^{That was it!!! The sensor was pressed up against some metal. I installed it poperly and now its working.}

^{Thanks a bunch}

^Dan