Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    No upcoming events found

KENMORE REFRIGERATOR MODEL 795.71019010, FROST ON EVAP


atiger

Recommended Posts

  • Replies 4
  • Created
  • Last Reply

Top Posters In This Topic

  • RegUS_PatOff

    2

  • atiger

    2

  • Samurai Appliance Repair Man

    1

Popular Days

Top Posters In This Topic

... FROST ON EVAP

there's supposed to be frost on the Evaporator...

pictures ?

Link to comment
Share on other sites

I meant excessive frost, fan blade grinding on it. The puzzling part is - its been going on for few months, but no temperature issues. Visually , Only vented part of evap cover (fan output) and air duct that leads to icemaker are covered with frost. But when I hand press against Evap cover I hear frost crunching behind. I suspect intermittent defrost (board, thermistor, or poor connection) or slow fan, or air leak somewhere. Seal itself is good and no frost around it. Fridge was under warranty up to few months ago, and fellows from Sears defrosted it couple times not solving anything.

Link to comment
Share on other sites

KENMORE 795.71019010

... when I hand press against Evap cover I hear frost crunching behind. I suspect intermittent defrost

... was under warranty up to few months ago, and fellows from Sears defrosted it couple times not solving anything.

soo... it had Defrost problems for a few months, but Sears didn't fix it ...

After it's manually defrosted, it may take up to a few weeks for problems to re-appear.

Pictures of Evaporator Frost pattern would confirm it

KENMORE 795.71019010 made by LG

may be similar model

LFD25860_Service_Manual.pdf ?

Link to comment
Share on other sites


×
×
  • Create New...