Jump to content
LIMITED TIME OFFER: Get up to $100 off tuition for Master Samurai Tech courses through November 30th ×
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.
  • Upcoming Events

    • 07 December 2024 03:00 PM Until 04:00 PM
      0  
      All Appliantology tech members are invited to join in the conversation for all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      This event is also a great time for any students at Master Samurai Tech to bring any and all questions about the coursework. We're happy to walk through any concepts you're having trouble with. Think of it like office hours with your teachers. 
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, December 7 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Recommended Posts

Posted

We don't have a lot of gas appliances around here and this was a new one for me. The folks in this rental house claim that they got up in the middle of the night to find that the gas oven was about a thousand degrees even though it was turned off. I should also tell you that this couple has a reputation of indulging in, hmm, pharmacuticals is a good word.

I turned the oven on and off several times, let it run for 10 minutes, turned it back off etc etc and it performed flawlessly. The only thing I noticed was that the hot surface ignitor remained on the entire time the gas valve was on - is this normal?

The couple couldn't tell me if the burner was on or not at the time (I was wondering if the ignitor itself, without the gas being on could cause such high heat) but that they were sure the switch was off.

Anybody seen this problem before or should I chalk it up to too much, uh, tylenol on a Saturday night? Thanks, Sam

  • Replies 2
  • Created
  • Last Reply

Top Posters In This Topic

  • RegUS_PatOff

    1

  • jambatt

    1

  • cuzzin sam

    1

Popular Days

Top Posters In This Topic

Posted (edited)

Thermostat controls ignitor. Ignitor controls control valve. Ignitor glows until thermostat shuts off ignitor when desired temp is reached.Bad ignitor will glow and build up some heat in oven if left on long enough, but temp probably won't reach 200 degrees.

Edited by jambatt
Posted

... find that the gas oven was about a thousand degrees even though it was turned off.

... hot surface ignitor remained on the entire time the gas valve was on - is this normal?

1) it may have been at the end of a Self-Clean Cycle that someone started ...

2) yes

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...