Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • 01 February 2025 03:00 PM Until 04:00 PM
      3  
      All Appliantology tech members are invited to join in the conversation for all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      This event is also a great time for any students at Master Samurai Tech to bring any and all questions about the coursework. We're happy to walk through any concepts you're having trouble with. Think of it like office hours with your teachers. 
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, February 1 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Recommended Posts

Posted

Need Tech Sheet.

Posted

kdog, can you try that download again?? Got the following message when I tried to download.

An Error Occurred

Sorry, an error occurred. If you are unsure on how to use a feature, or don't know why you got this error message, try looking through the help files for more information.

[#10870] We could not find the file specified

Posted

Tech Sheet - 8572216.pdf

link PM'd

Posted

Thanks Reg.

Posted

None of the LED's will light up. New control board installed. Still no LED's. No response from touchpad. Put in diagnostic mode using instructions in tech sheet (OWI circuit). Still no response from touch pad. Unit starts, water enters, pump comes on and wash cycle starts. Have to turn off at circuit breaker. None of the touchpad buttons lightup or work. Electrical connections OK. Thermal fuse has continuity. Ribbons look OK. Could touchpad be completely dead or could it be something simple that I'm overlooking???

Posted

# 1 . Console Assembly

# 2 . Ribbon Cable

# 5 . Interconnect Board

# 11 Electronic Control

all connected properly ?

W0510079-00002.png

Posted

Merged Topics

Moved to manual requests forum

  • Like 1
×
×
  • Create New...