rcrcowboy1 Posted May 6, 2012 Posted May 6, 2012 It would be worth a 30 pack for a service manual.Thanks for any help.MG
kdog Posted May 6, 2012 Posted May 6, 2012 Looks like an Old Skool unit, check here: http://appliantology.org/files/file/14-whirlpool-power-clean-filter-dishwasher-service-manual/ 1
RegUS_PatOff Posted May 6, 2012 Posted May 6, 2012 Looks like an Old Skool unitnot quite, but I'm not sure what it is, still lookingDU018DWTx c.2008 1
RegUS_PatOff Posted May 7, 2012 Posted May 7, 2012 starting to look like a Frigidaire or GE made for Whirlpool
kdog Posted May 7, 2012 Posted May 7, 2012 Yes, indeed it does - check this manual: http://appliantology.org/files/file/233-fridgidaire-18-inch-dishwasher/ 1
Budget Appliance Repair Posted May 7, 2012 Posted May 7, 2012 That doesn't look anything like the newer 18" Frigidaire dishwashers.Possibly Danby - never worked on one but saw something similar to that in a local appliance store and I believe I've seen one like that in the scrapyard, recall it being Danby or some other foreign type built. 1
Budget Appliance Repair Posted May 8, 2012 Posted May 8, 2012 Should not have doubted RegUS, (you really know your stuff).I guess I've never seen the new 18" Frigidaire units, I was only familiar with the 18" design before this model, with the vertical mount motor with plastic shaft that would melt down when the drain impeller got jammed.
johnsavit Posted August 17, 2020 Posted August 17, 2020 I'm on one now same model. Has a relay on frame under tub next to inlet valve. Relay clicks when start/resume pressed. No other response while advancing timer. No schematic of course.
johnsavit Posted August 17, 2020 Posted August 17, 2020 (edited) Getting .9a and 3.7a flipping through timer. Heater and locked drain pump? Edited August 17, 2020 by johnsavit Spelling
Recommended Posts