Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.

  • Upcoming Events

    • Appliantology Live Dojo, Saturday, 5/10/2025 @10 AM ET
      10 May 2025 02:00 PM Until 03:00 PM
      0  
      All are invited to join in the conversation for all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is available to everybody, including you! You don't have to be a member of Appliantology to join the fun.
      When: Saturday, May10 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to register. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it. 

Kenmore HE2

Guest BrokenArrow

By Guest BrokenArrow
in DIY Appliance Repair Help

Recommended Posts

Guest BrokenArrow

Guest BrokenArrow

Posted
Posted

I was working on an HE2 today. Main control gave an F23 error code. Changed control and this did away with the F23 code...so I thought. It never would spin up to full speed during diagnostics. During rinse cycle there is a "clicking noise" sounding like something stuck in between the spin basket and tub. I am not sure if this is all related or two or seperate issues. Any ideas what could cause this noise and "no high speed spin" condition? I thought of the motor control, but original complaint only listed clicking noise.

  • Replies 1
  • Created
  • Last Reply
  • Team Samurai
Samurai Appliance Repair Man Sensei

Samurai Appliance Repair Man

Posted
  • Team Samurai
Posted

Do you have the complete model number on this washer?

You sure that error code wasn't F13?

Archived

This topic is now archived and is closed to further replies.

Go to topic listing
×
×
  • Create New...