Jump to content
LIMITED TIME OFFER: Get up to $100 off tuition for Master Samurai Tech courses through November 30th ×
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.

  • Upcoming Events

    • Appliantology Live Dojo, Saturday, 12/7/2024 @10 AM ET
      07 December 2024 03:00 PM Until 04:00 PM
      1  
      All Appliantology tech members are invited to join in the conversation for all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      This event is also a great time for any students at Master Samurai Tech to bring any and all questions about the coursework. We're happy to walk through any concepts you're having trouble with. Think of it like office hours with your teachers. 
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, December 7 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Frigidaire Range m#FES365EQA

cuzzin sam

By cuzzin sam
in DIY Appliance Repair Help

 Share

Recommended Posts

cuzzin sam Sōhei

cuzzin sam

Posted
Posted

This one is allmost too embarrassing to ask but...I suspect a circuit board problem but,but...I can't get the control panel off. When you stop laughing, when you regain control and your breathing is normal...I see a couple of screws on the bottom edge but that doesn't seem to help so...I'll shut up now and wait.

  • Replies 3
  • Created
  • Last Reply

Top Posters In This Topic

  • cuzzin sam

    2

  • Budget Appliance Repair

    1

  • RegUS_PatOff

    1

Popular Days

Top Posters In This Topic

Popular Days

RegUS_PatOff Sensei

RegUS_PatOff

Posted
Posted

00717698.jpg

... I can't get the control panel off.

... When you stop laughing

looks like 6 Screws ... rofl.gif

(holes in # 16)

(looking for service manual)

R0510077-00001.png

Budget Appliance Repair Sensei

Budget Appliance Repair

Posted
Posted (edited)

You need to take the control overlay off first to get to the screws to remove the control panel.

Remove all the knobs and take the nuts off each control switch and the overlay will lift out the it will be obvious from there.

The nuts under the knobs are NOT what hold the infinite switches in place, they each have two normal inf switch mounting screws like you would find on normal ranges once you remove the overlay.

It took me probably 15 - 20 minutes to figure out that was the way to get in on the first one of these I worked on.

Edited by Budget Appliance Repair
cuzzin sam Sōhei

cuzzin sam

Posted
  • Author
Posted

thanks a million guys - i feel so much smarter now.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing
×
×
  • Create New...