Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • 11 May 2024 02:00 PM Until 03:00 PM
      0  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      This workshop is also a great time for any students at Master Samurai Tech to bring any and all questions about the coursework. We're happy to walk through any concepts you're having trouble with. Think of it like office hours with your teachers.
      As part of this workshop, we'll talk through a couple of case studies troubleshooting computer-controlled appliances. 
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, May 11 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Jennair Service Manual Request


Derik

Recommended Posts

Need service manual to program new boards for model # JES9860aab!!! Any help would be greatly appreciated!!! And thanks in advance! This site rocks!!!!!!!

Link to comment
Share on other sites

  • Replies 6
  • Created
  • Last Reply

Top Posters In This Topic

  • Derik

    4

  • RegUS_PatOff

    3

Top Posters In This Topic

Had severe water damage! Insurance is paying for repair and customer insisted on fixing instead of replacing oven?

Link to comment
Share on other sites

If memory serves me right the main control needs programed to oven cavity size ect??? Tech sheet ect destroyed by water, have no manual to use!!!

Link to comment
Share on other sites

... main control needs programed to oven cavity size ect???

not on that model

click on picture

Oven-Control-Board-74007226-01262579.jpg

click on picture

Oven-Control-Board-74009319-00993978.jpg

Link to comment
Share on other sites


×
×
  • Create New...