Jump to content
Click here to check out our on-demand appliance repair training webinars.

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • 15 March 2025 02:00 PM Until 03:00 PM
      5  
      All are invited to join in the conversation for all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is available to everybody, including you! You don't have to be a member of Appliantology to join the fun.
      When: Saturday, March 15 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to register. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it. 

Recommended Posts

Posted

Service manual needed please.

Posted

Fills with water to the correct level then stops. will not advance any further. We have replaced the timer & lid switch to no avail.

Posted

sorry, I deleted your post in Laundry Appliance..

I thought it was a duplicate.

Does the Timer Motor advance ?

Posted

no. It just sits there. I believe it to be the lid switch. Husband says no. anything else it could be?

Posted

... I believe it to be the lid switch. Husband says no.

I thought you said you replaced the Lid Switch (and Timer)..

just one or both Switches ?,

OR the Lid Switch Assembly ?

  • Like 1
Posted

Simply put. The lid switch was replaced. My Question is could that switch be faulty or perhaps there is something less obvious that could be the culprit.

Posted

just one or both Switches ?,

OR the Lid Switch Assembly ?

click on picture

Lid-Switch-Assembly-207166-00875878.jpg

click on picture

Lid-Switch-Assembly-208823-00576340.jpg

click on picture

Lid-Switch-Assembly-12001514-00892990.jpg

  • Like 1
Posted

I was right! There was a faulty switch in the new assembly. Thank you for you help.

  • Like 2
×
×
  • Create New...