Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • 21 December 2024 03:00 PM Until 04:00 PM
      2  
      All Appliantology tech members are invited to join in the conversation for all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      This event is also a great time for any students at Master Samurai Tech to bring any and all questions about the coursework. We're happy to walk through any concepts you're having trouble with. Think of it like office hours with your teachers. 
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, December 21 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Dead worms


Recommended Posts

Posted (edited)

Remember learning stuff from dissecting a dead worm or smelly frog in high school biology class ? Well at times i'd like to get my hands on a dead board etc for self-training purposes. Particularly those boards you don't run across too often. This may not be as important to some of you who can quickly read wiring diagrams on the spot or who can read a schematic the night before and easily remember to ohm the 5th pin on the j4 connector with the 15th pin on the l7 connector. Counting pins and trying to find that little writing on an unfamiliar board in a badly lit room can be cumbersome at best. I was reading a Samsung manual the other night and I kept repeating "huh? " and "wha...?" Easier understood when I was at the site with the board in front of me but I was praying for understanding the entire time. Anyhow, a section for training tools where we can send each other dead, useless or unwanted items for training purposes would be great. Recipient at the most, only pays for shipping and sender never expects the part back.

Edited by DurhamAppliance
  • Like 4
  • Team Samurai
Posted

An excellent suggestion, Brother Durham, and this was precisely one of the original visions of the Dojo forum where Brethren in The Craft could sharpen their combat skills and share tips with each other on weapons and tactics.  I attempted to convey this is the short description of the Dojo viewable on the homepage of this site:

 

 

 

This dojo is for Master Appliantologists, those with a black belt in Fixite Do, to get together and sharpen their skills.

 

 

It has since turned into sort of a general appliance repair forum that's not accessible to the general Appliantology student body.  

 

So, in another attempt to start such a forum, I started the Master Appliantologist's Armory forum:

 

 

 

Tech tips by and for Master Appliantologists.

 

 

And it wails a pitiful, lonely cry each night, bemoaning the lack of use and traffic.  Perhaps this would be a good home for your fine suggestion?

  • Like 3
×
×
  • Create New...