Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • 01 February 2025 03:00 PM Until 04:00 PM
      2  
      All Appliantology tech members are invited to join in the conversation for all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      This event is also a great time for any students at Master Samurai Tech to bring any and all questions about the coursework. We're happy to walk through any concepts you're having trouble with. Think of it like office hours with your teachers. 
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, February 1 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Recommended Posts

Posted

I am looking for a service manual for this series 70 dryer trying to determine where an intermittent squeal is coming from.

  • Team Samurai
Posted

A squealing noise in these dryers will almost always be from: 1) bad drum rollers or 2) bad idler pulley.  Best bet is to install the maintenance kit for this dryer, includes new drum rollers, idler pulley and belt.  Guts all the rolling components in one shot.  Click the pic below to git you one:

 

Maintenance-Kit-4392065-01168904.jpg

 

 

And here's how to install it:

 

http://youtu.be/GZsDbMuimm8

  • Like 2
Posted

Thanks so much...so what should the motor feel like when I take the belt off and spin it while it's installed? If I'm going back in I want to know if it's stiff as well.

  • Team Samurai
Posted

Motor pulley should spin silently and smoothly when you give it a flick.  There is a chance that the motor is the source of the noise but it's much less common than the drum rollers or idler.  Easy enough to tell, though, if you're going back out.  And take a maintenance kit with you-- even if you don't use it on this repair, you'll use it eventually on another job and probably soon.  

  • Like 2
×
×
  • Create New...