Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • 27 April 2024 02:00 PM Until 03:00 PM
      5  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological. 
      We have a special session planned for this one. Instead of the usual Show 'n Tell on a technical topic, we're going to post tech sheets in the comments to this Calendar Event (scroll down to see what's posted so far) and ask specific questions that can only be answered by reading the tech sheet. If you at least try to answer the questions beforehand, you'll get a lot more out of it. The tech sheet and the questions are posted in the comments section below.
      Your mission, if you should choose to accept it, is to check out the questions for each one and try to answer them ahead of time. Then come to the Dojo to see how well you did! 
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Need service manual for GE refrigerator model GFSS6KKXASS


Jedi Appliance Guy

Recommended Posts

  • Replies 2
  • Created
  • Last Reply

Top Posters In This Topic

  • Jedi Appliance Guy

    2

  • RegUS_PatOff

    1

Popular Days

Top Posters In This Topic

Thanks Grand Master Funk.

That's the right one. The issue with this one is the water dispenser not dispensing. I was looking for 110v going to the water valve when the cradle was pressed. Instead I found 110v passing through the water valve continuously, same as the ice maker valve which has no complaint and I even heard the ice maker cycle and fill while I was there. I assumed at that point the valves are always hot and the computer connects neutral. I knew at that point I needed the manual... Thanks man!

Link to comment
Share on other sites


×
×
  • Create New...