Jump to content
LIMITED TIME OFFER: Get up to $100 off tuition for Master Samurai Tech courses through November 30th ×
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • 23 November 2024 03:00 PM Until 04:00 PM
      2  
      All Appliantology tech members are invited to join in the conversation for all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      This event is also a great time for any students at Master Samurai Tech to bring any and all questions about the coursework. We're happy to walk through any concepts you're having trouble with. Think of it like office hours with your teachers. 
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, November 23 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Recommended Posts

Posted

Service call to be made, complaint is control panel lights up, dryer tries ? to run, but does nothing.   Any service, fast tract manual?

Posted (edited)

Service call to be made, complaint is control panel lights up, dryer tries ? to run, but does nothing.   Any service, fast tract manual?

 

http://appliantology.org/topic/41372-new-appliance-service-manual-added-samsung-dryer-fast-track-manuals-bundle

 

DV203 R4 Fast track.pdf

applies to this model

It's probably the belt or the thermostat on the blower housing.

Edited by Ohm
  • Like 1
Posted

Went across the ferry to the island this afternoon to service dryer.   Belt was chunked off shaft & idler pulley. Pulley mounting bolt had backed out so idler assembly was very loose.  Wheel on shaft was binding.  Cleaned unit up, disassembly drum rollers, cleaned wheels & shafts, used powdered graphite to lubricate wheels.  Checked heater coils, thermostat, & limit switches for continuity.  All good beeps.  Check for short to ground.  Checked resistance at thermistor, 11.8 Kohms @ 73 degrees.   243 VAC at receptacle, 120+volts each leg.  Reassembled unit. plugged in.

 

Dryer upon plugging in made its energized noise.   Pushed power button, nothing.  Pushed start button, dial lit up & drum started rolling.  after about 30 seconds dryer shutdown with audio & visual error code (l=0  thermistor open).  Pushed power button, nothing.

 

Any suggestions or way to put machine in diagnostic mode?   Domo

×
×
  • Create New...