Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • 28 June 2025 02:00 PM Until 03:00 PM
      0  
      All are invited to join in the conversation for all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is available to everybody, including you! You don't have to be a member of Appliantology to join the fun.
      When: Saturday, June 28 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to register. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it. 

Recommended Posts

Posted

May I have a service manual for this Frigidaire made for Kenmore Front load washer.  Complaint is no spin.

  • Replies 2
  • Created
  • Last Reply

Top Posters In This Topic

  • Patricio

    2

  • Samurai Appliance Repair Man

    1

Top Posters In This Topic

Posted

Thank you.  went & used a couple of manuals from previous posts that was not the same model number. an affinity manual & a 3 cu ft manual & a samurai video.  Unplug & door opens immediately.   Figured out fault code from blinking LED's again thanks to Samurai (4 door latch) 7 put into diagnostic mode everything good, pump moves water out.    Therefore it must be a defective door latch.    Not on my truck, part will be ordered.


×
×
  • Create New...