Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • 09 November 2024 03:00 PM Until 04:00 PM
      3  
      All Appliantology tech members are invited to join in the conversation for all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      This event is also a great time for any students at Master Samurai Tech to bring any and all questions about the coursework. We're happy to walk through any concepts you're having trouble with. Think of it like office hours with your teachers. 
      Also, follow the Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, November 9 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Whirlpool service manual Model WTW6500WW1


Lionelsson

Recommended Posts

Looking for a service manual for a whirlpool Model WTW6500WW1

Edited by DurhamAppliance
added model number to topic title
Link to comment
Share on other sites

  • Replies 7
  • Created
  • Last Reply

Top Posters In This Topic

  • Lionelsson

    4

  • Budget Appliance Repair

    3

  • DurhamAppliance

    1

Thanks for the file.  Just wondering why the part list do not show a shaft?  It must have one??

Link to comment
Share on other sites

It has one, use to be you had to order the complete new outer tub which contains the new shaft/bearings and seal already installed:

Part number: W10193886

Part number: W10193886

Outer-Tub-W10193886--01187465.jpg

 

 

Now they have a Shaft/Bearings/Seal replacement kit:

Part number: W10435302

Part number: W10435302

 

Which takes this tool to install:

Part number: W10447783

Part number: W10447783

 

For a one time deal probably best to just get the complete tub that already contains the new shaft/bearings and seal.  If you are a repair company might be better to purchase the tool and install the shaft/bearing/seal kits.

 

Here's a few discussions that should give you all the info you need:

http://www.appliantology.org/topic/26982-kenmore-oasis-he-whirlpool-cabrio-he-maytag-bravos-he-full-disassemblyouter-tub-replace-guide/

http://appliantology.org/topic/37050-maytag-bravo-washer-model-loud-roar-during-spin-tub-bearing-replacement/

Edited by Budget Appliance Repair
Link to comment
Share on other sites

I am told by part suppliers to get the whole tub, but owners will freak out.  I will try the bearing kit.  Already have the tool.   Thanks for your input.

Link to comment
Share on other sites

One of the big problems with getting the complete tub is the cost for over-sized shipping, I was pricing a job for a Frigidaire dryer that needed a new drum, (at one of my suppliers - they wanted close to $100 just for shipping!).

Link to comment
Share on other sites

Yes, that is true and the same with some other online parts house, (they don't burn you on the oversize shipping), ApplianceZone is another that is only $6.95 shipping, Sears only a maximum of $15.99 for anything over $75.00.

 

RepairClinic does charge an oversized shipping charge, ($100 extra for this other tub).

 

You just have to be aware of the policies of the part house you use and check before finalizing any orders when you have these large parts in your order.

Link to comment
Share on other sites

×
×
  • Create New...