Jump to content
Click here to check out our on-demand appliance repair training webinars.

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • 27 April 2024 02:00 PM Until 03:00 PM
      5  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological. 
      We have a special session planned for this one. Instead of the usual Show 'n Tell on a technical topic, we're going to post tech sheets in the comments to this Calendar Event (scroll down to see what's posted so far) and ask specific questions that can only be answered by reading the tech sheet. If you at least try to answer the questions beforehand, you'll get a lot more out of it. The tech sheet and the questions are posted in the comments section below.
      Your mission, if you should choose to accept it, is to check out the questions for each one and try to answer them ahead of time. Then come to the Dojo to see how well you did! 
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Samsung refrigerator rf261beaebc/aa


johntech

Recommended Posts

Service Manual

RF260BEAEBC/AA / RF260BEAESP/AA / RF260BEAESR/AA / RF260BEAEWW/AA / RF261BEAEBC/AA / RF261BEAESP/AA / RF261BEAESR/AA / RF261BEAEWW/AA / RF26HFPNBSR/AA
 
 
Training Manual                                                                                                                                            
RF260BEAEBC/AA / RF260BEAESP/AA / RF260BEAESR/AA / RF260BEAEWW/AA / RF261BEAEBC/AA / RF261BEAESP/AA / RF261BEAESR/AA / RF261BEAEWW/AA 
 
 
Service Pointers
ASC20130507001
RF220NCTABC/AA / RF220NCTASP/AA / RF220NCTASR/AA / RF220NCTAWW/AA / RF221NCTABC/AA / RF221NCTASP/AA / RF221NCTASR/AA / RF221NCTAWW/AA / RF260BEAEBC/AA / RF260BEAESP/AA / RF260BEAESR/AA / RF260BEAEWW/AA / RF261BEAEBC/AA / RF261BEAESP/AA / RF261BEAESR/AA / RF261BEAEWW/AA / RF263BEAEBC/AA / RF263BEAESP/AA / RF263BEAESR/AA / RF263BEAEWW/AA / RF263TEAEBC/AA / RF263TEAESP/AA / RF263TEAESR/AA / RF263TEAEWW/AA

SUBJECT

 Fresh Food section shelves out of alignment
 Symptom:          Shelves tilt at the center and may not line up correctly.
Background:    In production, the wrong size screw (30mm) was used to attach the
                          Evaporator cover and shelf support ladder.  This screw must be 35mm long. 
Factory Solution:      The error was identified and corrected beginning with March, 2013 production.  The correct screw is now used on all models.

Field Solution:           Replace the incorrect screw with a 35mm (1.37 in) stainless steel screw. 

Part Needed:           6002-001432             SCREW
 
 
ASC20121115001
RF260BEAEBC/AA / RF260BEAESP/AA / RF260BEAESR/AA / RF260BEAEWW/AA / RF261BEAEBC/AA / RF261BEAESP/AA / RF261BEAESR/AA / RF261BEAEWW/AA / RF263BEAEBC/AA / RF263BEAESP/AA / RF263BEAESR/AA / RF263BEAEWW/AA / RF263TEAEBC/AA / RF263TEAESP/AA / RF263TEAESR/AA / RF263TEAEWW/AA / RF323TEDBBC/AA / RF323TEDBSR/AA / RF323TEDBWW/AA
Symptom:When the left refrigerator section door is closed, the flap does not close properly, creating a gap and air leakage.
Background: The door flap is too low on the door. The spring-loaded tab at the top of the flap does not meet the cabinet actuator.
Solution: Please see the attached PDF file.
 
 
ASC20120905001
RF260BEAEBC/AA / RF260BEAESP/AA / RF260BEAESR/AA / RF260BEAEWW/AA / RF261BEAEBC/AA / RF261BEAESP/AA / RF261BEAESR/AA / RF261BEAEWW/AA / RF263BEAEBC/AA / RF263BEAESP/AA / RF263BEAESR/AA / RF263BEAEWW/AA / RF263TEAEBC/AA / RF263TEAESP/AA / RF263TEAESR/AA / RF263TEAEWW/AA
Subject:  The Auto Pullout Feature for the UpperFreezer Drawer does not work correctly. 
Background: The stops on the lower drawer are missing, so the upper tray will not roll out automatically. 

Solution: Replace the lower freezer drawer.  All new drawers include the stops.

 
 
 
Edited by Samurai Appliance Repair Man
  • Like 1
Link to comment
Share on other sites

×
×
  • Create New...