Maytag Model # MAH21PDDWW Coin Op washer problem!

[Waneewek]

Does anybody know how to increase the cost of the wash on this Maytag Neptune Mod # MAH21PDDWW?  It is a digital readout on the control board.  I looked for dip switches on the back of the circuit board, but didn't see anything.  This is not the typical ESD Vertical 8 that is on most coin ops.  Any help would be greatly appreciated!

 

Wan

[Adirondack Bob]

Open up the Service Door with the key. The Display will now show 6XX (the X= vend price- for example 607 would be $1.75) Press the Permanent Press key to increase vend price- up to 99 quarters.

[Waneewek]

Thank you very much for the info!  I new that it had to be simple, but without ever doing it before how would one know?  Once again, thanks!!

 

Wan

[Waneewek]

So, I told my buddy what you told me to do over the phone and left it at that.  He called me back about 2 hours later and said, that he did what I told him to do and now all he sees in the washer is minutes.  No dollar amount and nothing works at all.  Can you access more than changing the amount of quarters when you press the Permanent Press key?  I have to go their in the morning and I would like to have all of the programming info if there is any.  It is quite a drive for me.

 

Thanks, Wan

[Adirondack Bob]

Once you open that Service Door EVERYTHING about that washer can be changed.

 

I just uploaded the Service Manual:

 

http://appliantology.org/files/file/2248-maytag-neptune-fl-he-washer-service-manual-16022162/