DD24DCTX6V2 Fisher Paykel Dishwasher Heater element

[lip]

Hi 

I'm looking to buy a 2 year old Fisher Paykel dishwasher for less than $200.

The seller says the top drawer works fine but the bottom drawer starts the cycle and will not finish because of an error code about the heating cycle. They had someone look at it and they said it is repairable but they wanted too much so they ordered a replacement. I can pick it up once their new one arrives (still using the  F&P).

Is this the correct part for the replacement heater? http://www.amazon.com/gp/aw/d/B017QL6MEI/ref=mp_s_a_1_1?qid=1455511556&sr=8-1&pi=AC_SX225_SY325_QL65&keywords=fisher+paykel+522091

Could it be anything else? Difficult repair?

I currently have a DD605 that I inherited with the house. The control board is dead in the top drawer(I've switched the top and bottom boards and the fault follows the board . The bad unit stops during a cycle in the first few minutes and flashes the screen with no fault)....We like the dual drawer design.

Thanks 

 

[J5*]

could be heater, could be control board 

 

as with the 605 , swap the boards and see how it works 

if the same then heater fault 

 

[lip]

Thanks.

Is that the correct heater part?

 

[J5*]

On 2/16/2016 at 5:22 PM, lip said:

Thanks.

Is that the correct heater part?

 

yes it would be 

 

[lip]

Thanks