whirlpool duet washer fails c:06 error

[oldboarder]

i have a whirlpool duet washer model ghw9100lw1.

I was getting an f02 error, cleaned a small amount on goop from the filter and ran the washer again with the cover off. I  noticed the drain pump was pretty loud so I replaced it. while I had the pump out I took the drain hose off the tub and cleaned a fair bit of goop out of it. still not working properly. when I run the diagnostic test it drains the tub and the pump runs util it times out and fails c:06.

what's next? the pressure switch.

[16345Ed]

C:06 is still drain pump 

is there power to pump?

check all wire connections for good contacts  (DP2 1 and 2 on CCU) 

check wires for continuity

likely need new board but make sure you do your tests 

Good luck 

 

[sh2sh2]

Make sure pressure switch hose is not clogged, disconnect at switch and blow down into tub

[oldboarder]

blew something out of the pressure switch line and I am up and washing again.