Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.

  • Upcoming Events

    • Appliantology Live Dojo, Saturday, 5/10/2025 @10 AM ET
      10 May 2025 02:00 PM Until 03:00 PM
      0  
      All are invited to join in the conversation for all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is available to everybody, including you! You don't have to be a member of Appliantology to join the fun.
      When: Saturday, May10 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to register. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it. 

MVWX500XW0 maytag bravos still not working help

Anna Schwartz

By Anna Schwartz
in DIY Appliance Repair Help

 Share

Recommended Posts

Anna Schwartz

Anna Schwartz

Posted
Posted

MVWX500XW0 Maytag bravos washer is giving me error codes for lid switch fault and basket speed sensor fault. It is not draining and spinning 90% of the time. I replaced the lid lock switch and the shift actuator, as well as the balance rods. What is my next option. So tired of spending money.

  • Replies 3
  • Created
  • Last Reply

Top Posters In This Topic

  • Anna Schwartz

    2

  • vunger1

    1

  • 16345Ed

    1

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

Anna Schwartz
Anna Schwartz

I did do all the tests even in manual and all that. But think I finally got it. I think it was a wiring harness concetion issue combined with one of the above issues. Reconnect everything for the seco

vunger1
vunger1

I have on occasion found these units to have loose connections at the motor, causing no spin , agitate etc. Often these problems would be intermittent. So the harness connectors are a known weak point

16345Ed Sensei

16345Ed

Posted
Posted

Really need to pull tech sheet out of console and start following the diagnostic procedures. Always test, ensure you know what part has failed before replacing parts. 

 

Anna Schwartz

Anna Schwartz

Posted
  • Author
Posted

I did do all the tests even in manual and all that. But think I finally got it. I think it was a wiring harness concetion issue combined with one of the above issues. Reconnect everything for the second time and now it seems to be working... Who knows. 

  • Like 1
vunger1 Senpai

vunger1

Posted
Posted

I have on occasion found these units to have loose connections at the motor, causing no spin , agitate etc. Often these problems would be intermittent. So the harness connectors are a known weak point on these. I push the pins back in towards the middle of connector so they engage tighter , with no intermittent short or glitch

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing
×
×
  • Create New...