Jump to content
LIMITED TIME OFFER: Get up to $100 off tuition for Master Samurai Tech courses through November 30th ×
Click here to check out this guide.

FAQs | Repair Videos | Academy | Newsletter | Contact


DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.
  • Upcoming Events

    No upcoming events found

Recommended Posts

Posted

Door lock is randomly locking and unlocking. when first called to house it was stuck locked. I took out door lock and replaced it. week or so had passed and customer called again complaining of same issue. I replaced EOC. got a call next day it is still doing it. Any ideas?

  • Replies 12
  • Created
  • Last Reply

Top Posters In This Topic

  • hokyplaya1

    8

  • johntech

    3

  • Hiroshi

    2

Posted

Is there any icon or indicator on the display when it is locking?

Have you put the machine into diagnostics?

Posted

I haven't witnessed this issue as it is random...customer says it locks out control panel when it happens and the lock icon is lit. I have not been able to put into diagnostic as i haven't been able to find out how . Tech sheet missing.

Posted

Also....customer claims no error codes.

Posted

Is it heating properly? Have you tested the sensor?  If the oven thinks the temp is too high it will lock the door as a safety precaution. 

Posted

As far as im aware of it is heating properly...i thought the temp probe may be an issue..i have not tested it as of yet.

Posted

Does anyone know the sequence to put this unit in diagnostics?

Posted

If your model number is really ew30ds75ks2 then it does not list any service mode in tech sheet. Errors should pop up when detected.

Posted

Yes that is the proper model...and it hasn't thrown out any error codes at all as of now.

Posted

Normaly if this oven is locking the door for over temp issues I would expect it to give a f10 error. With no errors I would replace the control if the sensor tested good which you already did. Next I would wonder if there were any young children in the house that could be pressing buttons. I would not rule out that somebody is leaning against the touchpad. I would show customer how to lock and unlock the control and see if it locks itself while the controls are locked out.

Posted

It has given no errors per the customer. I have also shown them how to unlock controls and they say  w hen it locks on its own the unlock button is unresponsive.

 

Posted

Thank you for finding this..im sure ill get some answers with this.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...