Whirlpool dishwasher GU2700XTSS1 doesn't start

[edD]

need advice for my Whirlpool dishwasher GU2700XTSS1

 

The dishwasher doesn't start the wash cycle.  When entering diagnostic mode it displays the code d3.  Any advice appreciated.

[abaesemann]

■ Interval 18 – Dishwasher control platform number (“d3” Raptor/Tall Tub, “d2” Cheetah/Briva, “d1” Rush/Tall Tub, “d0” New Gen).

[edD]

5 minutes ago, abaesemann said:

■ Interval 18 – Dishwasher control platform number (“d3” Raptor/Tall Tub, “d2” Cheetah/Briva, “d1” Rush/Tall Tub, “d0” New Gen).

Ahh yessss...but what do I do about it?

[edD]

17 minutes ago, edD said:

 

 

The dishwasher doesn't start the wash cycle.  When entering diagnostic mode it displays the code d3.  Any advice appreciated.

I forgot to mention that it fills but doesn't start the wash cycle, and no lights are flashing.  I did the Normal/heated dry x2 sequence AND GOT THE D3 CODE.

[abaesemann]

d3 is just a generation version of the dishwasher, does it drain?

 

[edD]

Yes, it drains when I push the cancel/drain button.

[abaesemann]

You are going to need a meter to check for voltages, you either have a bad wash motor or control and or possibly both.

[abaesemann]

Part number: WPW10757217

[abaesemann]

Part number: WPW10084141

[edD]

9 minutes ago, abaesemann said:

You are going to need a meter to check for voltages, you either have a bad wash motor or control and or possibly both.

I have a multimeter.  can you post the procedure for testing, or link to a video, please?

[abaesemann]

do you have the wiring diagram that is in the toe kick plate, you need to check voltage coming out of board and or at motor, I do not have wiring info in front of me

[abaesemann]

Looks like p5-p9 on the board for power to the wash motor 120v

[edD]

I don't have the sheet, but  I'm saving the thread and will refer to it when I test.