GLD5760N10SS -- full manual?

[DanInKansas]

Manufacturer: GE

Type of Appliance: dishwasher

Model Number: GLD5760N10SS

Have you validated the model number at an online parts site like Repair Clinic? (yes or no): Yes

Have you watched the video on how to search for manuals and have you searched the Downloads section prior to posting this request? (yes or no): Yes

Have a food-left-on-dishes complaint on this unit. Nothing in sump. Customer using detergent pods and rinse-aid. Water valve replaced by previous servicer. Fills cup in upper rack in 45 seconds. Heater comes on during test cycle at appropriate wattage. 

NTC measures 46K at room temperature but minimanual gives no value range. Trying to figure out if heater may not be coming on during cycle. 

[Lighthouse]

it uses this mini manual

This technical service guide may help you out

 

[DanInKansas]

Yeah, unfortunately the full manual takes me to a unit that uses a turbidity sensor, which this model doesn't use. The minimanual doesn't have resistance ranges. So there's no way for me to know if that sensor is right. It's probably just fine but I'm at a loss. 

[Chat_in_FL]

On 9/5/2017 at 11:32 PM, DanInKansas said:

Manufacturer: GE

Type of Appliance: dishwasher

Model Number: GLD5760N10SS

Have you validated the model number at an online parts site like Repair Clinic? (yes or no): Yes

Have you watched the video on how to search for manuals and have you searched the Downloads section prior to posting this request? (yes or no): Yes

Have a food-left-on-dishes complaint on this unit. Nothing in sump. Customer using detergent pods and rinse-aid. Water valve replaced by previous servicer. Fills cup in upper rack in 45 seconds. Heater comes on during test cycle at appropriate wattage. 

NTC measures 46K at room temperature but minimanual gives no value range. Trying to figure out if heater may not be coming on during cycle. 

I'm leaning towards over-sudsing, don't dismiss this to quickly. Load and watch...