Jump to content
LIMITED TIME OFFER: Get up to $100 off tuition for Master Samurai Tech courses through November 30th ×
Click here to check out our structured, online appliance repair training courses for rookies and experienced techs.

FAQs | Repair Videos | Academy | Newsletter | Contact


DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.
  • Upcoming Events

    • 07 December 2024 03:00 PM Until 04:00 PM
      0  
      All Appliantology tech members are invited to join in the conversation for all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      This event is also a great time for any students at Master Samurai Tech to bring any and all questions about the coursework. We're happy to walk through any concepts you're having trouble with. Think of it like office hours with your teachers. 
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, December 7 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Recommended Posts

Posted

I purchased a used maytag dryer, it worked great for the first day, then it would sound like a washing machine, running very fast then it will shut down and need to cool down, I am hoping this is the thermal fuse and not the motor but would like some advice before I go spending the money on the fuse, if it is the motor going to junk it not worth the 50 bucks that I paid for it. If it is the fuse that is a cheap enough fix 

  • Replies 3
  • Created
  • Last Reply

Top Posters In This Topic

  • darren412

    2

  • evaappliance

    1

  • Babybear

    1

Top Posters In This Topic

Posted

if the thermal is blown it will not start back up when it cools down

Posted

You have not mentioned that when it shut off , did it restart and shut off again after 10 to 15 minutes of rest time ??    if it does then it is most likely a bad motor and your motors internal thermal fuse is shutting the motor down and when it cools down it will run again.  Check and see if there is any resistance  somewhere in operation of the dryer drum turning. If there is drag somewhere in the turning process that can be causing the motor to over heat.   Bad bearings in a motor could cause this also and making a noise like you mentioned.  check to see if the blower wheel is secured to the motor shaft properly.

Posted

By the way that is a good dryer model you have there .  It's worth fixing as long as you replace any worn components in the cabine while you are in there.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...