Frigidaire affinity Aeq8000fs0

[Jkingsley7]

Hi yes I posted on this forum before recently but I still need help please 

I have a Frigidaire affinity model aeq8000fso

it stopped heating while drying when doing the diagnostics I got the code E5b or E56. So I replaced the thermistor then it worked for a little bit but would stop after a few minutes hearing that is 

so then I replaced the heating element with the fuse that is on the panel it work d great for about 2-3 weeks 

then it will start tun king and will heat up sometimes other times no but it will shut off after approximately 10 minutes of running the three lights above the start button then start to blink 

 

please help me as I have already put 200 into the dryer with replacement parts thermostat and heating element and silver panel with fuse attached and I am temporarily out of funds trying to catch up on mortgage after being laid off

so any help or troubleshooting would be of great assistance 

[Jkingsley7]

Please refer to the previous post to see more details thanks here is precious post of it 

 

 

[16345Ed]

Have you ever tested it, let it run full cycle, with the exhaust duct unhooked at back of dryer? 

[Jkingsley7]

I will do that this evening

[Jkingsley7]

Okay so I ran it without the dryer vent exhaust duct on for a full cycle didn’t heat up at all now ugh 

any one any advice