Jump to content
Click here to check out our structured, online appliance repair training courses for rookies and experienced techs.

FAQs | Repair Videos | Academy | Newsletter | Contact


DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.
  • Upcoming Events

    No upcoming events found

Recommended Posts

Posted

HI

The bake element was severed so I replaced it. The oven baked once and now it will not heat. All other elements work so I'm at a loss?

  • Replies 12
  • Created
  • Last Reply

Top Posters In This Topic

  • raven316

    6

  • 16345Ed

    5

  • A & G Enterprises

    1

  • LearningTech

    1

Top Posters In This Topic

Posted

Double check your connectors make sure they didn’t come loose. 

 

Other than that need to test for voltage at element. 

Posted

Thanks, I should have said that I did check the element connectors. I don't have a voltmeter, I'll try to get one.

Posted
4 minutes ago, raven316 said:

Thanks, I should have said that I did check the element connectors. I don't have a voltmeter, I'll try to get one.

We need to determine if control is sending voltage to element. 

Posted

Will a non contact voltage tester work?

Posted

no you need to see the voltage that is reading

 

Posted

Noncontact is poor subsitute. You likely have a bad control. But only a meter will tell

Posted

OK, I think it's time to call a pro. I replaced the element for a friend but I don't want to screw it up. thanks

Posted

One more thing, this range has an error code function but we have not seen one. Does that tell me anything? Do I have to do something to get one to display or do the just show up?

Posted
4 minutes ago, raven316 said:

One more thing, this range has an error code function but we have not seen one. Does that tell me anything? Do I have to do something to get one to display or do the just show up?

They usually just throw an error, regardless need to verify any errors by taking voltage readings...

Posted

One more thing, this range has an error code function but we have not seen one. Does that tell me anything? Do I have to do something to get one to display or do the just show up?

 

Roger, I was just trying to figure out why we didn't see an error code. We unplugged the unit but that didn't seem to do anything.

Posted (edited)

If element new and connections good this is likely your issue and can be returned if not...

Part number: 316557106

Part number: 316557106

Edited by 16345Ed

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...