Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • 11 May 2024 02:00 PM Until 03:00 PM
      0  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      This workshop is also a great time for any students at Master Samurai Tech to bring any and all questions about the coursework. We're happy to walk through any concepts you're having trouble with. Think of it like office hours with your teachers.
      As part of this workshop, we'll talk through a couple of case studies troubleshooting computer-controlled appliances. 
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, May 11 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Kenmore Dishwasher m#665.13543n412 tech sheet needed


fillthebarman

Recommended Posts

Manufacturer: Kenmore
Type of Appliance: Dishwasher
Model Number: 665.13543n412
Have you validated the model number at an online parts site like Repair Clinic? (yes or no): Yes
Have you watched the video on how to search for manuals and have you searched the Downloads section prior to posting this request? (yes or no): Yes

Hello.

i need this tech sheet for no heat dishwasher.

thanks

Phil

Link to comment
Share on other sites

  • Replies 5
  • Created
  • Last Reply

Top Posters In This Topic

  • fillthebarman

    4

  • Son of Samurai

    2

Popular Days

  • Team Samurai
1 hour ago, fillthebarman said:

Have you validated the model number at an online parts site like Repair Clinic? (yes or no): Yes

That's not pulling up as a valid model number on Repair Clinic for me. You sure you've got it right?

Link to comment
Share on other sites

I actually did get it to go into test mode and element did get hot at end of test cycle so I'm thinking it's the board.  ??

Link to comment
Share on other sites

  • Team Samurai

Not sure why it wasn't showing up as valid on Repair Clinic, but I finally found the tech sheet. It's the same as this one:

 

  • Thanks 1
Link to comment
Share on other sites

×
×
  • Create New...