Jump to content
Click here to check out this guide.

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • 27 April 2024 02:00 PM Until 03:00 PM
      5  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological. 
      We have a special session planned for this one. Instead of the usual Show 'n Tell on a technical topic, we're going to post tech sheets in the comments to this Calendar Event (scroll down to see what's posted so far) and ask specific questions that can only be answered by reading the tech sheet. If you at least try to answer the questions beforehand, you'll get a lot more out of it. The tech sheet and the questions are posted in the comments section below.
      Your mission, if you should choose to accept it, is to check out the questions for each one and try to answer them ahead of time. Then come to the Dojo to see how well you did! 
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Calibrate Hotpoint oven


David54

Recommended Posts

Manufacturer: Hot Point
Type of Appliance: Range
Model Number: RB75DP1WH
Have you validated the model number at an online parts site like Repair Clinic? (yes or no): N/A
Have you watched the video on how to search for manuals and have you searched the Downloads section prior to posting this request? (yes or no): Yes

I would like to calibrate Oven temp on this older range. Would anyone have the manual or info for doing this?

 

 Thanks!

Link to comment
Share on other sites

  • Replies 5
  • Created
  • Last Reply

Top Posters In This Topic

  • David54

    3

  • Son of Samurai

    2

  • Hiroshi

    1

Top Posters In This Topic

Posted Images

  • Team Samurai
25 minutes ago, David54 said:
Model Number: RB75DP1WH
Have you validated the model number at an online parts site like Repair Clinic? (yes or no): N/A

That model number doesn't seem to be complete -- can you double check it?

Link to comment
Share on other sites

Are you using a quality mercury thermometer for temp tracking?

How much is it off by? Most controls wont adjust more than + or - 35 

Just curious how you are chasing this symptom... 

 

Link to comment
Share on other sites

I'm using a digital meter with a K type thermocouple to do the temps. It's only off 15 degrees.

 

Son of Samurai - thanks for the manual!!

Link to comment
Share on other sites


×
×
  • Create New...